Re: Moving into home with existing set up - RUCKUS Community Forums

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

Ruckus Wireless

|

We just recently moved into a home where the previous owners had 2 AP's and ethernet switch board installed. I can see the RUCKUS WIFI connection on my phone but it is requiring a username and password which I do not have.

I have pressed the reset button on the main unit but still not able to get the WIFI to reset to its "CONFIGURE_MEXXX" name.

Do the AP's themselves have their own factory reset button?

Thanks!

2 REPLIES 2

Yes the APs themselves can be factory reset using a paperclip/pin. There is a button to press for ~10 seconds while powered on to reset them.

You should then be able to connect to the Configure.Me-XXXXXX network with no password and proceed through the configuration wizard.

Just did the same procedure on my AP, no luck. Still present a secures WiFi and ask for password. Any ideas??