cancel
Showing results for 
Search instead for 
Did you mean: 

Mounting bracket for warehouse environment

ryan_sullivan
New Contributor

Has anyone found a good Ruckus compatible mounting bracket for a warehouse environment where you would be securing them to the overhead I-beams?  R5xx models.

2 REPLIES 2

dave_raines_86z
New Contributor III

Use the Ruckus metal mounting plate with some sheet metal screws and you are done.  They sell for $25 usually.  

sunny_gupta
Contributor II

Hi there, sure you can use the 902-0120-0000 Secure mounting bracket from Ruckus,  in combination with steel clamps through the slots on the bracket to secure it to a beam/truss.

See it here:

https://www.commscope.com/globalassets/digizuite/62143-ruckus-accessory-guide.pdf