cancel
Showing results for 
Search instead for 
Did you mean: 

Monitoring SNMP traps on Virtual SmartZone

helpdesk_talpa_
New Contributor
There's a couple SNMP traps we want to monitor, but these MiB's are not included in the MiB's download from the Support page. Does anyone have a way to monitor these event traps on the Virtual SmartZone 5.1?

ruckusSZAPDisconnectedTrap
ruckusSZCriticalAPDisconnectedTrap
ruckusSZAPFirmwareUpdateFailedTrap
ruckusSZAPFactoryResetTrap
ruckusSZCMResetFactoryByUserTrap


3 REPLIES 3

michael_brado
Esteemed Contributor II
Hello,

     Are you looking at vSZ-H (High Scale), or vSZ-E (Enterprise) latest 5.1.1 MIBs? 

https://support.ruckuswireless.com/software/2072-smartzone-5-1-1-0-589-mr1-snmp-mibs-for-sz300-and-v...

https://support.ruckuswireless.com/software/2073-smartzone-5-1-1-0-589-mr1-snmp-mibs-for-sz-100-and-...

     Do you see those OIDs in other/previous vSZ or SZ or SCG release MIBs?

eightohtwoeleve
Contributor III
Just do a web search for the trap name, grab the OID and off you go. 

helpdesk_talpa_
New Contributor
Thanks guys, I'll figure it out!
Labels