Have you tried factory defaulting this AP, with it's cable attached (as you don't have Mesh enabled
on the ZD), and see if it can get re-configured, and here's the latest 7982 AP User Guide to see what
the LEDs mean. From Support, Products, Indoor APs, 7982, Docs, here's the Solo AP 220.127.116.11.194
User Guide URL:https://support.ruckuswireless.com/documents/671-indoor-access-point-100-1-0-0-194-user-guide
The 7982 details begin on page 42, and page 43 has the LEDs and their meanings. Here's the
AIR LED specifics:
•Off: The AP is operating in standalone mode or operating as a root AP (RAP) or a non-mesh AP.
•Green: The AP is functioning as a Mesh AP (MAP), and the wireless signal to its uplink AP is good.
•Fast flashing green (two flashes every second): The AP is functioning as a Mesh AP (MAP), and
the wireless signal to its uplink AP is fair.
•Slow flashing green (one flash every two seconds): Mesh networking is enabled, but the AP is still
searching for a mesh uplink.