M510- How to access the real time GPS location after it was implemented in a moving vehicle.

[rajiv_kumar]

Suppose If I implement few of the M510 in the school buses now how would I get the real time GPS location of the buses. From where I am able top get the real time location (GPS).

[sunny_gupta]

This data is transmitted to the Smartzone Controller where you can view the location of M510s.

[rajiv_kumar]

Thank for the reply. So, I can't get the data If I use this AP as standalone (without connecting to SZ/ vSZ)

[sunny_gupta]

That is my understanding.
In fact, the M510 does not currently run on Standalone Code.  It must connect to a SZ (physical or virtual) to function.
Ruckus Unleashed software (controllerless or 'standalone' but up to 25 devices) support will be released for M510 shortly as well which is another option.  Though I believe in this operation mode GPS data will not flow..  that still requires a SZ.

[rajiv_kumar]

Thank for the reply. So, I can't get the data If I use this AP as standalone (without connecting to SZ/ vSZ)