Hi All. I have purchased some additional AP's for a client (r310's). They will be using these at a remote location.
I am setting these up at my office temporarily before deploying them, so they are in the same sort of layer 3 setup as they will be when deployed, however I am having some issue getting them provisioned.
At the moment, they show up in the zone director and I can adopt them, however they get stuck in a provisioning/disconnected loop.
The main site (where the zone director is located) has a bit of a crappy setup in the fact it has a double nat. There is a small DSL router sat on the end of the Internet connection and then a smoothwall firewall/webfilter with the zone director sat behind that. I have ports 12222-12223 and 11443 (secure upgrades) forwarded on both firewalls, and as mentioned the AP's show in the ZD console, so the connectivity is working to some extent.
The logs on the AP's say such things as:
Failed to download avp port mapping
failed|control file download problem
Failed on processing Configuration Response Message
Im really stumped now and can only think the double NAT is the issue, any suggestions?
