Showing results for 
Search instead for 
Did you mean: 

LAG Configuration for P300 bridges

New Contributor

Looking to set up a configuration with two P300 root bridges connected to an icx7150 and two P300 non root bridges connected to an icx 7250 and utilizing link aggregation to provide more bandwidth. I found this reference on the ruckus site
but at this point with all configuration in place, ports are in an up/LACP-Blocked
From what I have read this can be due to a protocol mismatch, but have not have found any configuration inconsistencies. The ports are tagged for multiple VLANS.  Any suggestions on why this isn't working as expected?