Im tryng to setup unleaead Network and it is asking the password. I'm putting the Last 6 of MAC address and filing

[jose_mani_samue]

[karthik]

If AP's Configure-Me-xx:yy:zz(last 3 octets of AP's eth mac) is asking for a password(Preshared key), may be it is not running Unleashed firmware (200.x series). It is running Standalone/Controller firmware (10x series).

Use the serial number of the Access point as preshared key for WLAN connectivity. super and sp-admin are username password for GUI access.

HTH.