I am using R610 and 2 x R510 with Cat6 cabling connected. So, should I turn "ON" the Mesh function?

[leo_chung_fsn1v]

I am using R610 and 2 x R510 with Cat6 cabling connected. So, should I turn "ON" the Mesh functtion? But I am afraid Mesh will not use the Cat6 cable, so that the speed will drop, right?

[leo_chung_fsn1v]

Hi Darrel and Abilash,

Well noted and thanks both of yours comments.  Very useful to me, thanks again!

Regards,
Leo