cancel
Showing results for 
Search instead for 
Did you mean: 

How can I tell if a client is connected with 5ghz or 2.4ghz and when they roam between them?

kurt_5686453
New Contributor II
How can I tell if a client is connected with 5ghz or 2.4ghz and when they roam between them?

Note: This topic was created from a reply on the iPad reauthentication issue... topic.
10 REPLIES 10

ahh, I've been looking at those logs for a while and never noticed the a/n g/n difference. Thanks

kurt_5686453
New Contributor II
I don't see that in my dashboard, I see this:

2013/11/26 10:48:55 Low User[mac address] joins WLAN[GuestWLAN] from AP[RuckusAP1]
2013/11/26 10:48:03 Low User[mac address] joins WLAN[WLAN] from AP[RuckusAP2]

bill_burns_6069
Contributor III

keith_redfield
Valued Contributor II
I think you want: http://www.wlanpros.com/wi-fi-stress-...

(Further to the record I am slightly taller than the other Keith..but he is much wiser)

bill_burns_6069
Contributor III
Keith:
I think you replied to the wrong thread.
I'm replying on "Is Channelfly usable in real world scenarios?"