Hi,
This may not work, it's just a guess, but my first thought when you mentioned high RF pollution was, why not change channels? Then I looked at your screenshot and I see you've disabled Background Scanning and allowed only channels 1,6,11.
ZoneDirector and Ruckus APs use Background Scanning to try to find a better channel, constantly. If Channel 1 is polluted, they will try to find a better channel. You may have forced the AP to use a bad channel and disabled the feature that allows it to try to find a better one.
My suggestion is allow all the channels on both bands, enable Background Scanning, and see if it will find a better channel by itself.
You also have 6 WLANs deployed on this AP. That's a lot. If there's any way to reduce the number of WLANs deployed on that AP, maybe try to reduce them. We say 8 WLANs is the recommended max otherwise performance will suffer. 6 WLANs is getting pretty close... you can use WLAN groups to put some WLANs on some APs and others on other APs so there's not so many WLANs on channel 1.
Again this is just a guess so please don't get mad at me if it doesn't work. I'm not actually a support guy I just comment here sometimes to try to help. 🙂
But it should be easier to try this and see if it helps, rather than physically moving the AP around.
Cheers,
Jay
