cancel
Showing results for 
Search instead for 
Did you mean: 

Heloo. How can I reset ruckus zone flex 7372 without button? Its Located very high.

aleksey_nimaev
New Contributor
 
3 REPLIES 3

john_d
Valued Contributor II
If you have its IP and can log into its web admin interface or SSH, you can reset it to factory defaults that way. 

michael_brado
Esteemed Contributor II
rkscli:  set factory
rkscli:  reboot

aleksey_nimaev
New Contributor
I can't login to AP, beacuse I set VLAN 100 without "trank mode port", now set Access mode with VLAN 100. It's conect to PoE port.