02-14-2024 11:44 AM
Hello, good afternoon,
with which Ruckus device model is the H510 device compatible for connection via MESH technology? I need to add a MESH access point, but I don't know which access point model allows me to connect in this way with this particular model. i have an h510, and need mesh hem an other Access Point.
thanks.
02-14-2024 06:42 PM
Hi @3ste4anC
H510 does support MESH with other Ruckus AP dual radio models.
Provided, they are on the same firmware version.
Below is the link for the available AP models >> Go to Filter section and you can see the dual AP models.
https://www.ruckusnetworks.com/products/wireless-access-points/
For more specific information if the AP is supported for the MESH or not, I would recommend to check the AP datasheet or the software release notes.