cancel
Showing results for 
Search instead for 
Did you mean: 

Converting h500 to unleashed?

stephen_gallagh
New Contributor
Is it possible to make the h500 unleashed?

We currently use ruckus r500s throughout our school and need to extend into an office where cabling is an issue..

I bought a h500 with the plan of joining it to a mesh network and using the LAN ports as needed (printer /desktop)

From what I have read I need an unleashed version of the firmware.

Will the h510 firmware go onto the h500. I have seen that both aps are on the latest firmware list. If so will it work? Or shall I return it for a 510?

Any work around would be appreciated?

Thanks
Steve
8 REPLIES 8

alex_shalima
Contributor
Hi Stephen,

If the WAP is not in the list of supported Unleashed products, it won't work. However, H510 is in the list.

It should be a very little difference in price for H510, try exchanging it. Also, for you use Mesh, keep in mind that it creates a link on 5Ghz, meaning your signal has to be good enough for mesh link to form.


Cheers,
Alex

nat_nat
Contributor II
Hi Steve,

First let me answer your question.

H500 is not supported under Unleashed portfolio. No, H510 Unleashed code is not compatible with H500 AP. 

Now let me help you with a solution to achieve your goal.

You mentioned that you have R500s throughout your school. Are these getting managed by ZoneDirector or SmartZone controllers? If so, you can enable "mesh" on the controller which will allow your H500 to become a mesh AP.  Once H500 becomes a mesh AP, as you said, you can then plug-in your printers/desktop to those LAN ports. 

Regards
Nat

stephen_gallagh
New Contributor
Hi Nat, we have no controller they are just linked, when one goes down one of the other 8 just takes over as master. Not sure what this is classed as? I have the option when I login to the r500 admin page to enable mesh, so would this do it? Thanks for your help

nat_nat
Contributor II
Sounds like you are running Unleashed (controller-less) solution already in your network. Is such instance, you would need Unleashed H510 AP (not H500) to add to your network. Unleashed H510 supports mesh. 

To enable, yes, you have to do it under 'Admin & Services -> Mesh'.