Connect wireless Bridge to Switch directly

[aya_al_jarrah]

Hello everyone ,
Is It a good idea to connect ( P300 OR 7731) PTMP with switch directly and connect the APs with that switch ?

[monnat_systems]

Hi,

No problem at all.

Just make sure you do channel planning and physical seperation of 5m if they are going to on the same pole or pretty close to each other..

[mark_powell_783]

Why not? If there is no possibility for a connection to be lost that's quite a good idea.
FAQ

[alan_rothenstre]

If you have APs and a PtMP going through a switch, on the bridge side I suggest setting your APs to Root only or disable meshing. Otherwise if you have other APs nearby, you will find the APs mesh and it might cause a loop which will bring down the bridge.