I currently have an Extreme Networks wireless bridge in place but it continues to drop. My vendor consulted with his site survey guys and they suggested we use the T301N APs to configure the bridge.
I purchased the two T301Ns and assigned a static IP to each but can't for the life of me find where to configure the point to point bridge in the AP. The firmware is 104.0.0.0.1347. Does this functionality require a controller? I need to pass 2 vlans across the bridge to a switch with 1 PC a printer and a phone. The distance is about 100 yrds or so. If this works well I will be configuring another pair for our remote shipping facility. The areas in question have a clear LoS and very little noise.
Thanks,
