cancel
Showing results for 
Search instead for 
Did you mean: 

Collected snmp Phy Errors

christovam_payn
New Contributor
I need to collect via snmp, the values of PHY Errors and Noyse Floor. Until then I could not identify the OID of these values. Below I have collected some that I could refer to, but I am not sure if they are correct. If anyone knows the OID?
I thank you.


ruckusRootMIB.ruckusObjects.ruckusZD.ruckusZDWLANModule.ruckusZDWLANMIB.ruckusZDWLANObjects.ruckusZDWLANAPInfo.ruckusZDWLANAPRadioStatsTable.ruckusZDWLANAPRadioStatsEntry.ruckusZDWLANAPRadioStatsFrameErrorRate.6.44.93.147.58.111.224.0 = Gauge32: 0

enterprises.ruckusRootMIB.ruckusObjects.ruckusZD.ruckusZDWLANModule.ruckusZDWLANMIB.ruckusZDWLANObjects.ruckusZDWLANAPInfo.ruckusZDWLANAPRadioStatsTable.ruckusZDWLANAPRadioStatsEntry.ruckusZDWLANAPRadioStatsFrameRetryRate.6.44.93.147.59.242.160.0 = Gauge32: 182

enterprises.ruckusRootMIB.ruckusObjects.ruckusZD.ruckusZDWLANModule.ruckusZDWLANMIB.ruckusZDWLANObjects.ruckusZDWLANAPInfo.ruckusZDWLANAPRadioStatsTable.ruckusZDWLANAPRadioStatsEntry.ruckusZDWLANAPRadioStatsRTSThreshold.6.44.93.147.58.151.160.1 = Gauge32: 2346

enterprises.ruckusRootMIB.ruckusObjects.ruckusZD.ruckusZDWLANModule.ruckusZDWLANMIB.ruckusZDWLANObjects.ruckusZDWLANAPInfo.ruckusZDWLANAPRadioStatsTable.ruckusZDWLANAPRadioStatsEntry.ruckusZDWLANAPRadioStatsFragThreshold.6.44.93.147.58.148.0.0 = Gauge32: 2346

enterprises.ruckusRootMIB.ruckusObjects.ruckusZD.ruckusZDWLANModule.ruckusZDWLANMIB.ruckusZDWLANObjects.ruckusZDWLANAPInfo.ruckusZDWLANVapTable.ruckusZDWLANVapEntry.ruckusZDWLANVapWlanRxErrorPkt.6.44.93.147.59.242.168 = Counter64: 0

enterprises.ruckusRootMIB.ruckusObjects.ruckusZD.ruckusZDWLANModule.ruckusZDWLANMIB.ruckusZDWLANObjects.ruckusZDWLANAPInfo.ruckusZDWLANVapTable.ruckusZDWLANVapEntry.ruckusZDWLANVapWlanRxDropPkt.6.44.93.147.59.240.72 = Counter64: 0

enterprises.ruckusRootMIB.ruckusObjects.ruckusZD.ruckusZDWLANModule.ruckusZDWLANMIB.ruckusZDWLANObjects.ruckusZDWLANAPInfo.ruckusZDWLANVapTable.ruckusZDWLANVapEntry.ruckusZDWLANVapWlanTxErrPkt.6.44.93.147.58.148.12 = Counter64: 0

enterprises.ruckusRootMIB.ruckusObjects.ruckusZD.ruckusZDWLANModule.ruckusZDWLANMIB.ruckusZDWLANObjects.ruckusZDWLANAPInfo.ruckusZDWLANIfTable.ruckusZDWLANIfEntry.ruckusZDWLANAPIfInErrors.6.44.93.147.59.247.48.31 = Counter32: 155

enterprises.ruckusRootMIB.ruckusObjects.ruckusZD.ruckusZDWLANModule.ruckusZDWLANMIB.ruckusZDWLANObjects.ruckusZDWLANAPInfo.ruckusZDWLANIfTable.ruckusZDWLANIfEntry.ruckusZDWLANAPIfOutErrors.6.44.93.147.58.151.160.146 = Counter32: 113397

enterprises.ruckusRootMIB.ruckusObjects.ruckusZD.ruckusZDWLANModule.ruckusZDWLANMIB.ruckusZDWLANObjects.ruckusZDWLANStaInfo.ruckusZDWLANStaTable.ruckusZDWLANStaEntry.ruckusZDWLANStaAvgRSSI.6.24.137.91.10.96.186 = INTEGER: 28
2 REPLIES 2

michael_brado
Esteemed Contributor II
You might need to contact Tech Support to see if these values are found in the MIB OIDs.

christovam_payn
New Contributor
Good afternoon.

These values were extracted from the ZD3000 controller with the snmpwalk command. I got in touch with Ruckus support in Brazil but they did not know how to inform. That's why I opened this call on the forum. Suddenly someone has been through it.

I need to collect the Noyse, PHY Errors and RF Polution via snmp.

Thank you.