Clients getting frequently disconnected on 2.4GHZ Radio while its is running
smoothly on 5GHZ in same network
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-27-2016 02:37 AM
Clients are getting frequently disconnected on 2.4GHZ Radio from R500 while its is running smoothly on 5GHZ in same network.Connected devices would disconnect frequently and new devices hardly get to connect.But no issue in 5GHZ.Any idea on what the issue could be?Also in some old devices with b/g it seems fine.Is there any way to disable n mode in vSZ for 2.4GHZ Radio?
5 REPLIES 5
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-27-2016 03:25 AM
Hi Raju,Your 2.4 Ghz might be a bit full.But first lets start with the software version running on the controller and on the R500.RegardsMartin
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-27-2016 04:22 AM
The controller is vSZ running 3.4.0.0.976,thanks
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-27-2016 11:05 AM
Do you have ChannelFly enabled on 2.4Ghz? If so that could be the culprit
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-27-2016 06:21 PM
Nope,Its on background scanning.I have disabled band balancing too but no help

