CommScope RUCKUS Community Forums

matt_hodge_d5fx · ‎08-05-2022

Hi - is there a way to change the firmware on an R500 AP from Smartzone to Zone Director?

ishant_sharma_6 · ‎08-05-2022

Hi,

Please perform below steps:

1) Perform a f/d on this AP by CLI or physical reset button.

rkscli: set factory

or

On the AP back console using paper clip, press hold the button which says "Hard Reset" within a tiny circular port for about 10 to 12 seconds.

2) Download standalone image :

3) Upgrade using CLI or WEB :

Regards,

Ishant

Changing Ruckus R500 from Smartzone to Zone Director Firmware