Can we force mesh on 2.4 IN ZD managed network having 2.4 &5 ghz dual band Ap

[vineet_tomar]

Hi,
Using T300 and R500 Ap managed by ZD1200 I SEE T300 is having low penetration in walls, resulting no mesh happening distance from T300 an R500 is 30 mtrs but a thik wall in between.
If I am not wrong meshing will be done on 5ghz for dual band radio.
Since 5 Ghz having low penetration, can we force the meshing on 2.4 Ghz so that we can connect mesh ap.

Aside I aslo se bandsteering issues on 9.10 firmware in mesh enabled network. Android, Iphone connects on 2.4 Ghz an not 5 Ghz

Thanks
Veenit Tomar

[andreas_barst]

Mesh will be disabled. I found some explanation why at http://bookreportwriter.com/. There's a cool guide to the process. And who knows if it can be transferred to the next level. Clients who don't see the same SSIDs advertised will not be able to chose the band that offers highest SNR/and other factors.