cancel
Showing results for 
Search instead for 
Did you mean: 

Can't mesh with Zoneflex 2741

gilles_dumangin
New Contributor II
I have a ZoneDirector 1100, 4 Zoneflex 7363 and one ZoneFlex 2741. 2 Zoneflex 7363 are Root AP as is the ZF 2741. I am trying to mesh one ZF7363 to the ZF2741 but it does not see it (even from a few meters).

I have followed the same guidelines to mesh a ZF7363 to another 7363 (plug it to the network, let it configure then replug it without network).

Do you know if I can mesh a SF 7363 to a ZF2741 or is it not possible ?

Thanks

Gilles
11 REPLIES 11

jason_hinterste
New Contributor II
Meshing takes place on 5 GHz band. 2741 is a single name 2.4 AP. You cannot and should not mesh swingle band AP

gilles_dumangin
New Contributor II
Thanks Jason, Did not know that. On paper (Ruckus papers) it says 2741 supports meshing as a node

monnat_systems
Valued Contributor II
gilles

it do supports mesh however when root ap is zf2741 and mesh ap is 2741.

gilles_dumangin
New Contributor II
Thanks guys, understood. It does not help my own situation but I do understand 100%. case closed 🙂 🙂