cancel
Showing results for 
Search instead for 
Did you mean: 

Can Someone Explain How User Traffic Policies Are Applied?

john_westlund
New Contributor III
I have a question regarding user traffic policies.  I know how to create and apply them, this is just more me wondering how they work.  I have an SSID that is not configured to tunnel back to the controller (SmartZone 100).  My AP's are on trunks that carry all the VLANS for the different vlan pools.  I can create a traffic policy and apply it to a user role and it works.  I thought that would only work if I was tunneling the traffic to the controller and that any restrictions would have to be on the network level through ACL's. 
1 REPLY 1

marcus_burton
New Contributor III
Hey John,
All the UTP actions are performed on the AP so that you can enforce consistent policies on both tunneled and non-tunneled WLANs. In role-based policy scenarios, if you are using the SZ to centralize the authentication process (i.e. SZ is AAA/RADIUS/NAS Client), then the role is resolved on the SZ and sent to the AP for policy mapping. Otherwise, the AP does this locally.

thanks,
Marcus