cancel
Showing results for 
Search instead for 
Did you mean: 

CPU monitoring using SNMP

soulcage57
New Contributor

How can I Monitor CPU usage, I am using PRTG, I can Monitor network bandwidth and device uptime, But I cant get CPU usage, Access point is R510 

4 REPLIES 4

syamantakomer
Community Admin
Community Admin

Hi @soulcage57,

Please confirm if AP is in standalone mode or you are managing it using a controller.

Also confirm the controller/AP software version.


Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn

I have 10 APs, one of them is master and I am managing Network from there.

You still did not confirm the product info and software versions.

Since you mentioned "master" I am assuming it is Unleashed.

As per the SNMP guide for 200.14, system CPU utilization is supported.

syamantakomer_0-1700765379655.png

https://docs.commscope.com/bundle/unleashed-200.14-snmpref/page/GUID-01089E44-D7B1-45E3-B28B-1343640... 


Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn

sanjay_kumar
RUCKUS Team Member

Hi @soulcage57 
The exact OID would be as below

ruckusUnleashedSystemStatsCPUUtil
.1.3.6.1.4.1.25053.1.15.1.1.1.15.13.0

You can fetch the subtree of this OID to find the list of connected APs to Master.