We're in the process of installing a WLAN for use with Ekahau B4 tags for messaging and general location tracking. I'm looking for some people that had experience with these things for some info on any configuration parameters I should be careful about. I have also written to Ekahau.
I have found an older best practice guide from Ruckus but it is old and there might be some newer recommendations. http://goo.gl/QLeFPd
What I would like to know is:
- We will use channels 1, 6 & 11 only but should I disable background scanning. I was thinking on living it on, but not use CF
- We will use B4 are 11bgn, but b is getting deprecated and I'm wondering if disabling 11b completely is a good idea?
- If disabling 11b isn't a good idea can higher basic rates be implemented? For example can the lowest rate be 5.5Mbps instead of 1 or 2Mbps?
- Anything else to look for?
This one is for everyone that got blamed for either the Ruckus/Ekahau installation.
We recently deployed Ekahau in a hospital and there were problems with tags not connecting to server properly. Guess who got blamed for that one.
We found that the server installed on ESXi by another company was using 2 ETH cards in teaming mode in the active-active configuration which was causing these issues. I'm guessing this is either ESXis problem or the switches were blocking traffic coming from one of the interfaces. There might be an ARP-poison issue with that configuration, I don't know as the Extreme switches were installed by yet a 3rd company.
Anyway changing to active-standby solved, or disabling one interface solves it.