I have the same problem in the following environment: vSZ-E (4 vCPU, 16GB RAM, 100GB HDD) 172.17.0.6: **Controller version: 18.104.22.168.862 **Control Plane Software Version: 22.214.171.124.820 **AP firmware version: 126.96.36.199.1010
r500 172.17.0.100 **initially managed by an old ZD1100(firmware 9.10)
I did the following with my r500: 1.set factory 2.reboot 3.Upgraded firmware to standalone 100.1 4.set scg ip 172.17.0.6 5.(from the management menu of the r500) Specified the controller IP 6.set discovery-agent enabled 7.reboot
repeated the process with firmware 104.0 & 110.0
Nothing seems to work, the r500 does not join the vSZ-E, no log messages. Only the ZD1100 can see the r500(when I reconnect the ZD1100 to my LAN)
I use OPNsense as a DHCP server, AP and vSZ-E are on the same LAN (no NAT present), AP can ping vSZ and vice versa. show lwapp2scg --> "accept all"
But when APs are under the control of ZD1100 (9.10), the vSZ tries to upgrade the r500 firmware in infinite loop as seen in events of vSZ-E: - Migrating AP1 - Migrated AP1 - Migrating AP1 - Migrated AP1 - Migrating AP1 - Failed to upgrade AP1 - Migrating AP1 - etc...