cancel
Showing results for 
Search instead for 
Did you mean: 

A new Rogue[04:4f:aa:f1:ec:3b] with SSID[island-31EC30] is detected. This msc showin from ZD3000. ruckus 2741 unable to join ZD.

moshiur_rahman_
New Contributor II
A new Rogue[04:4f:aa:f1:ec:3b] with SSID[island-31EC30] is detected. This msc showing from ZD3000. ruckus 2741 unable to join ZD3000. 
2 REPLIES 2

monnat_systems
Valued Contributor II
with limited info, i must ask the following:

1) firmware version on ZD3000?? as ZF2741 is End of life product and controller may be running new version which does not support ZF2741
2) do you have other ZF2741 working on the same controller?
3) if answer to above is yes, then is this AP supposed to work as Mesh AP or normal wired AP?

moshiur_rahman_
New Contributor II
Dear Concern

Thanks for reply.  I have downgrade firmware although installed firmware support zf2741.  Some aps are back after factory reset several time.  is there any options for mash in a single ap?

Thanks