2 APs not allowing devices to communicate

[david_zwissler]

I have one Ruckus R700 and one Ruckus 7982, they are both setup as standalone and placed on different sides of my house. Both are connected to my  home ISPs modem/router via DHCP. When I am on the AP in the office I cannot communicate with items joined to the AP in the living room (R700 = office, 7982 = Living room). The reason this is an issue, I run Apple Homekit and my main device is in my office, which cannot unlock or communicate with any devices in the front of the house. I know using a ZD would relieve my pain, however for just two APs seems overkill. Also they do not support unleashed for either of these products.

[DarrelRhodes]

Hi David,

Have you somehow enabled client isolation?  Can devices connected via the 7982 communicate with each other ok?

Thanks,
Darrel.

[david_zwissler]

As far as I can tell Client Isolation isn’t an option for these two standalone APs. They are not connected via ZD or unleashed.
Yes, if I have my home device in the front room I have no issues communicating.