We have a zd 1100 and multitude of zf7372 aps on our network. We would like to upgrade our environment to an on-prem virtual controller and R510 aps.Can we setup progressively in parallel the new environment with the same ssids to ease the implementa...
Our ZD1100 and Aps are end of life. We are evaluating the refresh routes. The question we have is what are the pros and cons of using a virtual appliance zone director on-prem vs the cloud service?Any input is greatly appreciated, thanks.
The port for the Ap (access point) on the switch has to be also trunk.
See my config below.
interface GigabitEthernet1/0/1 description Your Ap description switchport trunk allowed vlan x,x,x,(list your vlans ids) switchport mode trunk
