CommScope RUCKUS Community Forums

matt_skalecki · 08-10-2020

I have a support ticket open with our vendor, but I'm hoping others have seen and resolved my issue.I'm deploying Mitel 69XX series phones to several new stacks of icx7150 switches (a mix of 48zp and 48pf). I'm using LLDP MED network policies to set...

matt_skalecki · 07-07-2021

The Mitel documentation mentions using dscp 24 for signaling traffic and dscp 46 for RTP traffic in a few locations. The two I'm seeing now are the "General Network Requirements" section of the "MiVoice Connect Planning and Installation Guide" and pa...

matt_skalecki · 07-07-2021

We have not resolved this. We were fortunate enough to be able to easily move the phones off the multi-gig ports and onto ports 17-48, so we gave up troubleshooting. I have periodically tested phones after installing firmware updates, but no luck ...

matt_skalecki · 07-30-2020

Is this feature still being tracked for inclusion?

matt_skalecki · 05-12-2020

For anyone who is still running into this error when trying to use the official Ansible modules for ICX, make sure that you're using "transport = network_cli". Ansible's default transport is "smart" and causes the "protocol error, doesn't start with...

matt_skalecki · 03-14-2019

Does anyone have any information on this?On 5.1.0.0.496 I receive an 500 (internal error) response when calling the DELETE method on the serviceTicket endpoint, and the serviceTicket continues to work for other requests.The URI of my request is 'http...

CommScope RUCKUS Community Forums

User Statistics

User Activity

ICX7150-48zp : LLDP MED Voice policy UNKNOWN for MiVoice Connect phones on 2.5G ports

Re: ICX7150-48zp : LLDP MED Voice policy UNKNOWN for MiVoice Connect phones on 2.5G ports

Re: ICX7150-48zp : LLDP MED Voice policy UNKNOWN for MiVoice Connect phones on 2.5G ports

Re: Inter-VRF Route Leaking

Re: protocol error, doesn't start with scp!

Re: Virtual SmartZone API : How should serviceTicket be used?