CommScope RUCKUS Community Forums

leo_chung_fsn1v · 05-19-2019

Dear all,Does anyone can help to enable the Port 2 on R610 (picture as below) and how to use it as Link Aggregation? Thanks a lot!

leo_chung_fsn1v · 04-12-2019

I am using R610 and 2 x R510 with Cat6 cabling connected. So, should I turn "ON" the Mesh functtion? But I am afraid Mesh will not use the Cat6 cable, so that the speed will drop, right?

leo_chung_fsn1v · 06-15-2019

Hi Ankush,Surely, I have the support portal account but my problem is cannot find the AP admin Guide. Please see below:Also, would you please tell me "does any way can enable LACP from GUI (graphical user interface)"? Because I don't really know co...

leo_chung_fsn1v · 06-13-2019

Hi Ankish,Thanks for your reply, but I cannot find the AP admin Guide from the link you provide https://support.ruckuswireless.com/documents/2404-ruckus-indoor-ap-110-0-user-guide and I also cannot search the AP admin Guide on Ruckus R610. So would ...

leo_chung_fsn1v · 04-12-2019

Hi Darrel and Abilash,Well noted and thanks both of yours comments. Very useful to me, thanks again!Regards,Leo

leo_chung_fsn1v · 04-12-2019

Hi Darrel,Thanks for your prompt reply, so you mean that Mesh function is not useful in my case because all my 3 x Ruckus AP are all wired to switching hub, right? Thanks in advance!Regards,Leo

CommScope RUCKUS Community Forums

User Statistics

User Activity

How to enable R610 Port 2 and configure as Link Aggregation on Ruckus-Unleashed?

I am using R610 and 2 x R510 with Cat6 cabling connected. So, should I turn "ON" the Mesh function?

Re: How to enable R610 Port 2 and configure as Link Aggregation on Ruckus-Unleashed?

Re: How to enable R610 Port 2 and configure as Link Aggregation on Ruckus-Unleashed?

Re: I am using R610 and 2 x R510 with Cat6 cabling connected. So, should I turn "ON" the Mesh function?

Re: I am using R610 and 2 x R510 with Cat6 cabling connected. So, should I turn "ON" the Mesh function?