Jose, Where are you located? Your best bet is probably to engage a Ruckus Channel Partner in your area for assistance (at least with your initial configuration and testing).--Jon
As I suspected, you don't have a "WAN" IP Address to your upstream Internet Router. From when you connected your laptop to the Internet directly, your IP Subnet for the Internet is 192.168.1.0/24 and your gateway (next hop) is 192.168.1.254. Yo...
Please capture the output from the following commands and post it to the thread:SkipShow runShow VersionShow Ip IntShow Ip RoutepageBest guess without more information is you don't have a "WAN" IP address for the port connected to the Internet. Sin...
For the R730 to run at full capacity with all spatial streams you need 31.0 watts (e.g. more than POE+ which is a maximum of 30 Watts).If you're using Ruckus ICX switches, you may be able to use the POE overdrive feature which will do upto 45 watts o...
Starting with 8.0.90 we introduced the UFI (Unified Fastiron Image). When upgrading from pre 8.0.90 code, you have to first upgrade to 8.0.90 and then do a second upgrade to 8.0.90ufi. If you skip the intermediate steps, it will look like the swi...
