We been having some issues with upgrading ap zones to version 6.0
Last ap patch is applied (18.104.22.168.3073) but upgrading directly to this seems to cause issues with some of the ap's.
It happens with all type of models R720, R510 etc.. Totally random...
We have a few sites that we moved from our vSZ to a Zonedirector (due to ap's not being supported on newer vSZ version).
Zonedirector is running 10.1.2.0 build 318, newest one supporting the ap's in question, a mix of R300/R700/H500.
I've been testing unleashed on different model ap's for sometime now.. Have also deployed a cluster with R500 at a client site..Today i tried R510 with unleashed firmware.. It proved to be extremely buggy and not working at all. Everything seems ok d...
Yes, so it would seem. We been playing around with MTU on zonedirector to see if it would help in any way, but no such luck. Right now ping to site is stable at around 7ms, no packet loss as far as we can see.
Ah, you know. It's not that bad. The 6.0.0 support zones from 5.2 and up, so we don't have to upgrade everything yet. We just had a few tests just to check. So was just wondering if somebody else was working on this.
We've been running 5.2.2 for some time and it works fine.
Reason for the upgrade was support for R350 AP. We have a planned installation with these, as soon as we can get a delivery.
Per my understanding only supported by 6.0.0....
There is definitely something strange here in regards to connection issues.
Tried to factory reset an ap and flash it with standalone software and then connect it to ZD again.
AP joins and downloads firmware, but then it is stuck, it never complete...
Yes, I know. The reason these old sites were moved was due to version 6.0.
Latency should be fine, ping from site to ZD is around 20ms, so this should be fine.
And we have two other sites on same controller with same ap's and same latency which ...