CommScope RUCKUS Community Forums

chris_griffiths · 06-08-2015

I currently have two sites connected by a layer 3 network. At each site L3 switches route the traffic. At the main site i have a ZD setup and APs connected to the same layer 2 network ( Vlan 1 - management) - 192.168.5.X/24 - This is fine the Wireles...

chris_griffiths · 06-14-2015

I am going to do some testing in the next few days and i will report the findings. Thanks for the suggestions thus far.

chris_griffiths · 06-09-2015

I understand that using tagged VLANs will resolve the issue at the site with the ZD however the remote side will have for instance VLAN 200 but this will not be visible to the ZD as it's at a different site.

chris_griffiths · 06-08-2015

No the APs have already joined the ZD. This is specifically an issue with Wireless clients and the DHCP IPs that they are obtaining.

chris_griffiths · 06-08-2015

Each subnet has a DHCP scope supplied by the L3 switch at that site. The APs obtain DHCP addresses from the correct DHCP scopes (same if i connect a laptop to the port.) It's only the wireless clients that get an incorrect IP. (from the management Vl...

CommScope RUCKUS Community Forums

User Statistics

User Activity

DHCP local subnets zone director

Re: DHCP local subnets zone director

Re: DHCP local subnets zone director

Re: DHCP local subnets zone director

Re: DHCP local subnets zone director