CommScope RUCKUS Community Forums

point_of_presen · 03-23-2018

Going through the documentation (which is pretty shoddy) I can't seem to figure this out. My best guess, from what I've read, is:Unzip firmware distribution into TFTP server rootAdd option 66 pointing to DHCP server (e.g. 192.168.0.1)Add option 67 po...

point_of_presen · 03-26-2018

My PC is not my TFTP server, my router is (and is also my DHCP server.) I tried setting up TFTP on my laptop in case the Brocade didn't like them being the same address, but no change.I think the only thing left to try is setting up one Brocade as a ...

point_of_presen · 03-26-2018

My PC is not a TFTP server, my router is; it's also my DHCP server.

point_of_presen · 03-26-2018

Hmm, very frustrating, that's exactly the setup I'm using (although not on a Brocade DHCP server.) My TFTP server is the same machine as the default gateway. I've tried a few variations such as option 150 instead of 66, and still no luck. Thanks for ...

point_of_presen · 03-26-2018

Also worth noting that the documentation is wrong regarding configuration downloads as well. It does request multiple configuration files:* hostnameMAC-config.cfg* hostnameMAC.cfg* hostname.cfg* brocade.cfgBut it stops after the first one. Claims tha...

point_of_presen · 03-26-2018

ICX7150 8.0.61a. Just completely ignores whatever I put in option 67 (which I assume is what your config is calling a "bootfile".) No download attempts at all.

CommScope RUCKUS Community Forums

User Statistics

User Activity

How to auto-provision Brocade switches by DHCP

Re: How to auto-provision Brocade switches by DHCP

Re: How to auto-provision Brocade switches by DHCP

Re: How to auto-provision Brocade switches by DHCP

Re: How to auto-provision Brocade switches by DHCP

Re: How to auto-provision Brocade switches by DHCP