RUCKUS Forums - About jason_pomeroy

jason_pomeroy · 11-17-2025

Hello all,We have a batch of new ICX-7550 and ICX-8200 devices running 10.0.10 and when trying to copy our Batch Buffer commands from our old switches I am getting an error "Node doesn't exist"Even the help for command batch doesn't show anything. I...

jason_pomeroy · 04-10-2019

We've used ICX-7750 switches for a while to support fiber links to all of our campus wings but now we are looking to use the devices to replace our aging router for each school. We were able to configure the port 1 for our WAN link and port 2 for ou...

jason_pomeroy · 08-31-2016

I'm planning to setup a separate VLAN for our Chromebooks and rather than changing the configuration of all my site switches that are only using VLAN1 would I be okay to use Tunnel Mode on my Chromebook SSID to tunnel all WLAN traffic back to my Zone...

jason_pomeroy · 11-21-2025

Thanks Maria, I was afraid of that.

jason_pomeroy · 04-11-2019

I may be getting in over my head now but we do use vlan 1 for network hardware throughout the site so our Brocade switches all have a default of 7 and run ports in dual-mode 1 with the other vlans if phones or student devices are attached.I've setup ...

jason_pomeroy · 04-11-2019

Thanks both for the replies. We do send out 802.1q tagged VoIP and student VLANS out to the wings so we're used to using dual-mode on the switch side.I'll play with the ve interfaces now. If I understand this correctly now we are in essence treating...

jason_pomeroy · 09-02-2016

Only Internet access, nothing local.

User Statistics

User Activity

Batch Buffer commands failing on new ICX switches

ICX-7750 routing and switching concurrently

Separate VLAN for Chromebooks

Re: Batch Buffer commands failing on new ICX switches

Re: ICX-7750 routing and switching concurrently

Re: ICX-7750 routing and switching concurrently

Re: Separate VLAN for Chromebooks