I have some Foundry FESX424F-PREM switches running version 3.1. I see from various places online that jumbo frames are supported.In the config menu, I do see the jumbo command to enable jumbo frame support switch wide.In a manual I dug up on version ...
I have some Foundry FESX424F-PREM switches. They are running version 3.1. I also have IronWare 7.2. Can I jump from 3.1 to 7.2 or are there intermediary steps I need to go through to ensure a smooth transition?
Well, it worked on my spare, no config switch. I guess it's time to try it on the production ones.FESX424F Router#show ver SW: Version 07.2.02rT3e3 Copyright (c) 1996-2010 Brocade Communications Systems, Inc. Compiled on Oct 23 2015 at 05:43:57...
To change the MTU for interface 1/5 to 1000, enter the following commands:
FastIron(config)#int e 1/5
FastIron(config-if-1/5)#ip mtu 1000
No good indicator around there...