I have more than one client mostly in 2.4Ghz that are connecting not to the near AP R600 2 meters but they are connecting automatically to the far access point R500 where is 3-4 meters away plus kitchen and 2walls in between. I reduced already the ...
Hi there,here, I have ZD1112 with 10 APs with 9.7.2.0 build 9 firmwarefirmware is possible to do a FULL isolate of WLAN without VLANsand set few wireless(not wired) host in the whitelist? I tried different combinations and it working only with wire...
Hi Daniel,thanks for your reply ,at the moment, the firmware installed is 200.3.9.13.228 and these are my settings 1 the band balancing at the moment is set to 10% shall I drop to 2% ?2 do I need also enable the "band balancing" in the WLAN to make...
@William Burnett "This is finally fixed in 200.5."https://forums.ruckuswireless.com/ruckuswireless/topics/setting-individual-networks-on-single-unleas...I posted also this idea:https://forums.ruckuswireless.com/ruckuswireless/topics/unleashed-set-ssi...
