CommScope RUCKUS Community Forums

chadm · 04-21-2024

I have several C12Ps, all running 9.0.10j: #show verCopyright (c) Ruckus Networks, Inc. All rights reserved.UNIT 1: compiled on Jan 12 2024 at 09:59:12 labeled as SPR09010j(33554432 bytes) from Primary SPR09010j.bin (UFI)SW: Version 09.0.10jT213Compr...

chadm · 04-23-2024

I appreciate that approach, and have already tried it. However, this power limit is communicated to the devices, which influences their performance (e.g. an AP goes into lower power mode if it does not negotiate full class 4 power at boot, despite u...

chadm · 04-23-2024

There was no confusion. I was asking about a feature that the documentation appeared to indicate was supported. It isn't supported. The documentation would benefit from an update ensuring others that might want to use all the available power their...

chadm · 04-23-2024

Which brings us back full circle to my original ask. I am respectfully requesting adding 'power allocation dynamic' to the C12P code please. If you see my power usage versus the power allocation in the requested CLI outputs, I am unable to add addi...

chadm · 04-23-2024

Do you have a link to version 10.0.00 for the C12P?

chadm · 04-23-2024

As per the link I shared, the documentation illustrates the use of the command in 9.0.10, hence the reason I updated my C12P to 9.0.10:https://docs.commscope.com/bundle/fastiron-09010-managementguide/page/GUID-CAA036D6-595D-4481-A140-2CFAFD05B0CB.htm...

CommScope RUCKUS Community Forums

User Statistics

User Activity

Ruckus ICX7150 C12P Dynamic PoE Power Unavailable

Re: Ruckus ICX7150 C12P Dynamic PoE Power Unavailable

Re: Ruckus ICX7150 C12P Dynamic PoE Power Unavailable

Re: Ruckus ICX7150 C12P Dynamic PoE Power Unavailable

Re: Ruckus ICX7150 C12P Dynamic PoE Power Unavailable

Re: Ruckus ICX7150 C12P Dynamic PoE Power Unavailable