Good afternoon. Can someone tell me the minimum firmware version required on vSZ-H and AP FW for R670, R560, R760, and R770? Currently running 6.1.1 and wondering if it can support these APs. Thanks.
I have a bunch of Ruckus T710 and T610 access points that are currently running 5.2.2.0.2069 firmware that I'd like to upgrade to 6.1.1.0.1274 firmware so that they are aligned with our Data Plane. When I trigger an upgrade on our controller for thes...
It appears to correct this issue, the T710 and T610 models must be upgraded to 6.1.1 and then immediately factory reset and re-provisioned. Once this procedure is done, the rebooting issue stops and the AP functions as normal on 6.1.1 firmware.
@Dilshad_Zafar Apologies, here is the rest of that section and the next section: ### Kernel Oops ###0xdf400000[0]: Image: type=1 index=1 total_boot=13 ### Processes: ###PID PPID USER VSZ STAT COMMAND1 0 root 1156 S init2 0 root 0 SW [kthreadd]3 2 roo...
In the zone I am migrating from (5.2.2) the settings are 30 minutes and 2 hours as shown above. In the zone I am migrating to (6.1.1), the settings are also 30 minutes and 2 hours. There are about 30 T710 and T610 units in this zone that exhibit this...
