CommScope RUCKUS Community Forums

As per the datasheet for the Access point it shows the following:Environmental Conditions:Operating Temperature: -4°F (-20°C) to 140°F (60°C)Operating Humidity: up to 95% non-condensinghttp://ruckus-www.s3.amazonaws.com/pdf/datasheets/ds-ruckus-r710....

It's possible the new update has mdns to unicast disabled because by default unleashed is configured to convert multi cast traffic to unicast.

Hi Nils,I have not received any response or updates in reference to my feature request. Sorry.

I have not had the pleasure to work with the Cisco SG300 and it may behave differently. I am using an Araknis 300 series switch. The settings I provided were how I had to configure the Araknis switch with Unleashed R500 AP. The uplink to the AP is se...

Try setting the port on the switch to not tag if it is. If I recall we had similar issues when the switch port was set to tag all. We configured vlan tagging on the corresponding port which routed the traffic to the correct network. For example: Vlan...