We can try CLI command which forces AP to upgrade the firmware from the ZD.
Login to the AP CLI using PUTTY application.
Execute the below command from the AP CLI.
fw force-update
Hi,
For example.
WiFi 1 Tag vlan 5 with AP port1 connecting to network 1-Bridge to WAN
WiFi 2 Tag vlan 10 with AP port 2 connecting to network 2-Bridge to WAN
WiFi 3 Tag vlan 15 with AP port 3 connecting to network 2-Local Subnet NAT and Route t...
An access point Can be up and running with out connection to the Zone-Director from 10 min to 1440 minutes.By default it is 30 min if the auto recovery field on the WB GUI is left to disabled set to 0 the AP will continue to service existing assoc...
Hi Bob,
As you said, Yes Apple devices have a strong tendency to connect to 5 Ghz .
If you want to force idevices, apple TVs, etc to connect to 2.4 Ghz which has better signal strength compared to 5 Ghz.,then the better option would be to create an...
HI,
From your description I came to know that in your network.
Vlan 3-> Native Vlan for standard SSID[untagged].
Vlan 5 -> guest WIFI
->When you try to connect the guest wifi what IP address do your clients get?
Do they get APIPA IP or an IP...
