Hey Folks,
I'm trying to phase out vlan1 from an existing deployment. It currently consists of 4 h510 APs and an ICX6610. Like OP on Dec 16 "Change Unleashed to be able to use VLANS", I'm looking to clean-up.
I've created 6 VLANs to service ...
Hey @david_black_5940365 ; The user clients are on wireless (but I have an h510 so can mark the ports in vlan as well).
The traffic of question is what originates from the AP though (heartbeat, ssh, etc). Your suggestion is what I had originally ...
The issue turned out to be I was blocking some needed traffic in the upstream firewall. I noticed that tracepath was traversing the firewall for queries so I started thinking maybe this config was setup for router-on-a-stick (which I don't want).
...
I'm not eliminating untagged traffic, I'm just trying to place clients on the correct-for-them vlan. Since 1 is default native; I don't want newly onboarded equipment or any misconfigured device to be on my management network. It should be on lowest ...
It can not be *configured* to use a specific vlan but on the switch side I should be able to set any/all untagged traffic to one specific vlan. This is a basic basic thing but I must have overlooked something.
