CommScope RUCKUS Community Forums

kshal · 02-08-2021

Hi everybody, we have some strange behavior on Ruckus ICX switches.If we try to ping core switch (stack of two ICX 7750) from user PC, or just from access switch stack (ICX 7250) response time can be significantly varies.It could be 150ms, or 500ms, ...

kshal · 02-12-2021

Hi Matt, see below: show default values sys log buffers:4000 mac age time:300 sec telnet sessions:5 ip arp age:10 min bootp relay max hops:4 ip ttl:64 hops ip addr per intf:24 when multicast enabled : ig...

kshal · 02-09-2021

It was done to go from "Draft version of Global RSTP (IEEE 802.1W/D3)" to RSTP.

kshal · 02-08-2021

We have two networks - CCTV and LAN, both on ICX-7750, and both have this issue. I'm not sure that approx hundred uplinks are dirty, or failed. All counters on physical interfaces are looking good (statistic on most loaded interface is attached below...

kshal · 02-08-2021

@sandeep_gupta_89lya7d7doyxy Yes, we tried to do that earlier, and icmp delay increased synchronously on different VLANs.And icmp packet loss is synchronously too.

CommScope RUCKUS Community Forums

User Statistics

User Activity

ICX switches have an icmp response time with significant delay

Re: ICX switches have an icmp response time with significant delay

Re: ICX switches have an icmp response time with significant delay

Re: ICX switches have an icmp response time with significant delay

Re: ICX switches have an icmp response time with significant delay