CommScope RUCKUS Community Forums

kelvin_chow · 12-14-2020

Hi all, I have 2 ICX 1750 switches(1st ICX7150-24P & 2nd ICX7150-C12P) and trying to connection them by a trunk port(1st:1/1/24 & 2nd:1/1/12).But, I don't know the configuration commands. My target is trying to ping through the PC on Same Vlan 2 of ...

kelvin_chow · 12-21-2020

Hi Sunny, Thank you for your detail explanation. Regards, Kelvin

kelvin_chow · 12-17-2020

Hi Sunny, After applied your steps, I success to ping between them. You are correct: I want to connect the vlan 2's ports(e.g.1/1/1-1/1/4 on 12p switch) to another switch vlan 2's ports(e.g.1/1/1-1/1/8 on 24p switch) for same department staff PCs c...

kelvin_chow · 12-14-2020

Hi Greg, Thank you for your advice. But, I am not sure whether I can apply it on my case since these 2 switches are located on 2 different floors. Therefore, I am try to connect them via trunk port instead of switch stacking as one switch.

kelvin_chow · 12-14-2020

Physical connection

CommScope RUCKUS Community Forums

User Statistics

User Activity

How to config the trunk port between 2 ICX 7150 switches for pinging through same vlan id and the configuration commands

Re: How to config the trunk port between 2 ICX 7150 switches for pinging through same vlan id and the configuration commands

Re: How to config the trunk port between 2 ICX 7150 switches for pinging through same vlan id and the configuration commands

Re: How to config the trunk port between 2 ICX 7150 switches for pinging through same vlan id and the configuration commands

Re: How to config the trunk port between 2 ICX 7150 switches for pinging through same vlan id and the configuration commands