cancel
Showing results for 
Search instead for 
Did you mean: 

zone director 1100

pradeep_dtsp
New Contributor
I have zone director 1100 in that ethernet port not functioning ....... so is there any other option like configure this zone director using console.... 
2 REPLIES 2

syamantakomer
Community Admin
Community Admin
Hi Pradeep,

ZD1100 comes with two 1 Gig ports. Could you check if both ports are not working or just one.

If both eth ports are not working then device cannot communicate with network, so you have to replace this device.

Even if you configure things from CLI, how ZD will communicate with network. It needs network connection over eth ports for AP/ZD communication and internet.

Regards,
Syamantak Omer

Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn

michael_brado
Esteemed Contributor II
ZD Console access settings per KBA-4232:


When trying to access ZD via console cable these value's needs to be as used.

Ruckus Zone Director Console baud rate is 115200. and we use 1 stopbit, 1 data bit, no parity, no flowcontrol.