cancel
Showing results for 
Search instead for 
Did you mean: 

one AP with 3 SSID and 3 subnet

cedric_bantigni
New Contributor II

hello,

is it possible to do this ?

I want with one AP (r300) and ZD  1200, have 3 SSID and 1 difféerent subnet.

example:

SSID 1 with  subnet 1

SSID 2 with subnet 2

SSID 3 with subnet 3


and these 3 SSID get ip by the same DHCP server.

between AP and Dhcp server, there is one routeur configure on relay DHCP.


thank's for your help

 

6 REPLIES 6

chbane_mohamed
New Contributor III
Yes it's possible, just the port of the access point should be trunk

thank's but the R300 has one port. there is a another parameter for more port ?

This one port should be trunk

shane_ferguson
New Contributor III
In addition to Chbane's comment you will need to assign the VLAN for each SSID by setting it in the Advance Section of  each WLAN.