06-19-2015 09:27 AM
06-22-2015 03:17 PM
Interference is generally responsible for intermittent problems. Failed to read CCA reg is one message that is symptomatic.
The more detailed definition of CCA:
Channel Assessment (CCA) is one of two carrier sense mechanisms in WLAN
(or WiFi). It is defined in the IEEE 802.11-2007 standards as part of
the Physical Medium Dependant (PMD) and Physical Layer Convergence
Protocol (PLCP) layer. CCA involves two related functions - CCA-CS and
Carrier Sense (CCA-CS): Ability of the receiver to detect and decode a WiFi preamble. From the PLCP header field, the time duration (in us) for which the medium will be occupied can be inferred and when such WiFi preamble is detected the CCA flag is held busy until the end of data transmission.
Energy Detect (CCA-ED): Ability of the receiver to detect non-WiFi energy in the operating channel and back off data transmission. The ED threshold is typically defined to be 20dB above the minimum Rx sensitivity of the PHY. If the in-band signal energy crosses this threshold, CCA is held busy until the medium energy is below the threshold.
Your other AP message is a "clean-up" disassociate sent after a client roams away from an AP and is perfectly normal/ok.
I can think of one bug in 188.8.131.52.220 related to 'host only, loop detect' which could result in blips or occasional missed RDP keystrokes. It might be worth evaluating performance on 184.108.40.206.15.
06-23-2015 04:10 AM
06-25-2015 04:08 PM
06-26-2015 04:15 AM