client authentication issues

[jean_opperman]

I have a couple of clients not able to connect to a wireless network from the Ruckus. They can connect to other networks fine, and other laptops connect to the network fine.
Setup is: Ruckus ZoneDirector1106 with 9.10.1.0 build 59 with two AP's.
The problem clients have different operating systems.
If I duplicate the network and change the authentication from 802.1x-eap to 'open' the clients can connect.

Please assist. 

[jean_fabrice_ad]

you can't do 802.1X with local database you can perform this Type of tunnel with a Radius Server, i guess, then if really you think that it is a 802.1X that you perform try to installate CA certificate on the clients machines and observe 

[jean_opperman]

I am using 802.1x EAP. Where would I get the certificate?

[jean_fabrice_ad]

i see, it is possible in fact, then upload CA certficate from your zone Director and install on the clients, and try

[jean_opperman]

I'll give that a go and revert. I'm at that client again on Tuesday.

[jean_fabrice_ad]

ok okk no problem