Hello. I want block rogue APs in my building. Zone Director correctly detecting APs For simplicity. I turn on my d-link AP and connect their to internal network. ZD immediately reported that detected new malicious AP (Same-Network). despite the set parameter "Protect the network from malicious rogue access points.", i can still connect to d-link AP from my mobile phone and works with no problems and disconnects. I misunderstand how this should work? FW: 10.2.1.0 APs: R500, R510, T310
When you are testing using the D-Link AP, on the ZD under Services&Profiles >> WIPS & Rogue devices, are you able to see the Rogue AP (D-Link) under "Current Active Rogue Devices", "Known/Recognised Rogue Devices" & "User Blocked Rogue Devices"?
Can you get us the screen shot of the WIPS & Rogue devices settings?
And now i can connect my phone to dlink and dlink1 networks without disconnections. At this time strongest AP ruckus broadcasting at 6 channel, same as dlink.
Also i start sniffing in 6 channel. I not understand, I assumed that I would see a large number of deassoc frames... But maximum 1 frame per second and i think that this packet not related to AP "dlink" suppression.