Zone Director 1200 Not Connected Web İnterface

[Anonymous]

Hi,

I can not access the device 's web interface .

I need to reboot my reach .
After a while, it lost access happening again .
The upper status LED flashes red .
Then simultaneous wireless connections are breaking and coming back.
Best regards

[Anonymous]

I do not have problems when I run the standalone access points. I'm having this problem when I run with Zonedirect 1200. There is no conflict over wired netow rope. I will share with you whether recording package with wire Shark.

[martin_martin]

Hi Ferdi,

I think, the best way forward is that you open a case with support.

They can help you in detail to troubleshoot your issue.

Kind regards
Martin 

[Anonymous]

Thank you Martin
Thank you for your help
Best regards

[Anonymous]

Hi Martin,

Zone Director 1200 network monitor file wire shark link (.pcap)

http://we.tl/b6KKK1U3Tu 

Please help me

Best regards

[Anonymous]

ferdi & martin...

i "think" its one of those issue to do with ARP table flooding (ER-2106). its recommend to upgrade to 9.9.1 MR version. May be you can start troubleshooting from there..

btw - one of my customer's ZD1100 had similar issue for couple of months and upgrading to 9.9.1, problem not seen any more. it was above issue which i mentioned...